Fittings

Fitting is the connecting part of the pipeline, installed for branching, turns, transitions to other diameters, as well as when it is necessary to frequently assemble and disassemble pipes.

Fittings also serve to seal the pipeline and other purposes.

Fittings connecting the ends of pipes of the same diameter are called straight, fittings, fastening the ends of pipes of different diameters are transitional fittings.

Variety of fittings for high-pressure hoses

As a rule, systems in which fittings for high-pressure hoses are used can operate in the temperature range from -20 to + 120 ° C for carbon steel and from -60 to + 200 ° C for stainless steel.

The fittings for the high-pressure hoses are divided according to the shank type into three series:

Universal series – it is used for all high-pressure hoses (except for 6 braided hoses).

CS series – is designed for crimping of spiral hoses, while removing the inner and outer layer of rubber high-pressure hose is not required.

Interlock series – it is used for crimping of braided hoses and it is necessary to remove the inner and outer layers of rubber of the high-pressure hose;

Here you can buy fittings for high-pressure hoses for any special equipment brought from America, Japan, Europe, China or produced in the CIS. All our fittings comply with world-class standards.

Buy fittings in Kazakhstan and Russia.